C-Clamp Modified For Welding Work
David Simpler, Elkton, Md.: “There are times when a conventional C-clamp can’t be used to hold an object in place, such as when you’re welding something on a flat surface. So I welded a large nut onto the clamp, then torque the clamp to hold the piece of metal. I can screw a bolt through the nut to apply pressure from another point. If I want to use the clamp at an angle, I use a second nut to adjust the clamp to the desired angle.
![](/img/download-story.png)
Click here to download page story appeared in.![](/img/entire-issue.png)
Click here to read entire issue
Modified For Welding Work FARM SHOP Miscellaneous David Simpler Elkton Md : “There are times when a conventional C-clamp can’t be used to hold an object in place such as when you’re welding something on a flat surface So I welded a large nut onto the clamp then torque the clamp to hold the piece of metal I can screw a bolt through the nut to apply pressure from another point If I want to use the clamp at an angle I use a second nut to adjust the clamp to the desired angle