«Previous    Next»
Fence Unroller Adjusts For 2 Or 4-WD Pickups
“My new Ez Fenzer fence unroller/stretcher can be easily adjusted for use on both 2 and 4-WD pickups. It also works great on tractors and skid loaders,” says Philip Runion, Live Oak, Fla.
The patented fencer is designed to handle 330 ft. of 48-in. tall rolls of woven or welded wire. It comes with a separate 2-ft. long, L-shaped “drop hitch” bracket that attaches to the fencer and fits into the pickup’s receiver hitch. Made from 2-in. sq. tubing, the bracket has 2 sets of holes. It slips into a short length of tubing welded onto one side of the Ez Fenzer’s frame and pins on with 2 bolts. The bracket has 2 sets of holes in it, allowing you to move the bracket up or down 2 in. depending on the height of the pickup’s receiver hitch.
“Whether it’s on a 2 or 4-WD pickup, the roll always stays about 2-in. off the ground to keep it from dragging,” says Runion. “It lets you keep the roll as low to the ground as possible without dragging so you don’t have to stretch the fence at an upward angle.”
The Ez Fenzer also can be used with a 3-pt. adapter hitch for use on a tractor, or a 2-pt. hookup that quik taches to a skid loader.    The MSRP price for the Ez Fenzer is $389.    You can watch a video of it in action on the company website.
Contact: FARM SHOW Followup, Philip Runion, 574 Chopwood Dr., Inwood, Wv. 25428 (ph 386-515-2170).    


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2020 - Volume #44, Issue #5