2020 - Volume #44, Issue #5, Page #38
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
“Stool And Bucket” Combo Straddles Garden Rows
He used scrap steel and 1 1/2-in. round tubing from an old trampoline to make an 18-in. wide, 18-in. high stool, then attached a 5-gal. plastic bucket to one side of it. The bucket sets inside a 12-in. dia. metal ring welded to one of the stool’s legs, with the bottom of the bucket about 4 in. off the ground. An 8-in. wide rebar handle is welded on front of the stool, which sets on a pair of legs welded to 16-in. long horizontal metal skids. The top of the stool is made from plywood, with shag carpeting stapled onto it.
The design allows Kress to pick beans and peas while sitting directly over the row, and without having to bend over. “Sitting above the row, I can easily lay the bean stalks or pea vines over to one side and see all the pods,” says Kress. “When I want to move, I just grab the handle and slide the stool forward. The bucket stays out of the dirt and doesn’t get caked with mud, so I’m always able to bring a clean bucket of vegetables into the house.”
Contact: FARM SHOW Followup, Doug Kress, 1702 14th St., Tell City, Ind. 47586 (ph 812 547-6359; sfkress_1702@yahoo.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.