Pto-Mounted Chain Holder

Pto-Mounted Chain Holder POWER TAKE OFFS PTO S Mark Daun Kiel Wis came up with this pto guard-mounted log chain holder for his Deere 2030 tractor “I use the chains for pulling logs or firewood limbs ” says Daun “Most people wrap the chains around the 3-pt ’s lower arms but that’s ineffective dangerous takes too much time and gets messy whenever you need to use more than one chain The box attaches to the lugs where the 3-pt top link would normally be and rests on the pto guard ” The 2 boxes are separated by a short length of angle iron welded in each corner except for where the attaching links are located “Each box holds at least two 16-ft chains ” says Daun “Holes in the bottom allow melted snow and dirt to fall through The spacer between the boxes provides a window to see the drawbar for hitching to a wagon or trailer Three bracket-mounted springs keep excess chain inside the box yet allow the chain to feed out safely if it ever unhooks from the grab hook on the crossbar ” Contact: FARM SHOW Followup Mark Daun 19734 Point Creek Rd Kiel Wis 53042 m_daun@icloud com

To read the rest of this story, download this issue below or click here to register with your account number.