Quick-Tach Front Lift For ATVs

Quick-Tach Front Lift For ATVs ATV S “Our patented new Quick-Tach Lift makes it easy to use forks snow blades and other attachments on the front of ATVs and UTVs ” says John Gustafson THOR Attachments The front-mount winch-powered lift features a quick-tach plate with spring-loaded latch pins that allows quick and secure mounting of attachments Once engaged the attachment is raised and lowered by an electric winch supplied by the customer The winch cable goes over an elevated pulley that raises and lowers the quick-tach faceplate A top link in combination with two lift arms maintains the position of the plate at a consistent angle The THOR front lift attaches to the ATV by simply slipping it into the front 2 by 2-in receiver hitch Then the winch cable is run up over the lift pulley and hooked to the quick-tach faceplate To hook up an attachment line up the faceplate with the receiver plate on the backside of an attachment and raise the faceplate to engage with the receiver plate To switch attachments simply release the latch pins lower the attachment to the ground and back away Sells for $1 295 Weld-on receiver plates to fit implements sell for $145 Several attachments are available equipped with receiver plates Contact: FARM SHOW Followup John Gustafson THOR Attachments LLC ph 715-797-0325; thorllc@yahoo com; www thorattachments com

To read the rest of this story, download this issue below or click here to register with your account number.