Nifty New Round Bale Feed Out Cart
 ✖  |
"We built it in response to dairy farmers who came to us looking for a better way to handle round bales in barns," says Harry Van Dyke, Camtech Products Inc., manufacturer of a new hand-pushed feed cart for round bales with a hydraulic lift cylinder and free-spinning bale unroller turntable.
Designed to handle bales up to 5 ft. dia. at 2,000 lbs., it's a simple, easy-to-handle rig that nearly anyone can operate. It loads the bale hydraulically with a bale spear mounted on a spinning turntable. Powered by a 110-volt hydraulic unit, it plugs into an extension cord when loading a bale. Once loaded, you unhook the cord and push the cart up and down aisles in the barn, peeling hay from the bale by turning the turntable, which rides on a double tapered roller bearing.
"It saves your back. Takes no effort to load a bale and, once loaded, the cart rolls freely. It's simple, with no complicated mechanisms requiring maintenance. Sells for half the price of other bale feed-out carts on the market at $2,800 (Canadian)," says Van Dyke.
For more information, contact: FARM SHOW Followup, Camtech Products Inc., P.O. Box 301, Cambridge, Ontario Canada N1R 5T8 (ph 519 622-3634).
Click here to download page story appeared in.
Click here to read entire issue
Nifty new round bale feed out cart HAY & FORAGE HARVESTING Bale Handling (5) 15-2-25 "We built it in response to dairy farmers who came to us looking for a better way to handle round bales in barns," says Harry Van Dyke, Camtech Products Inc., manufacturer of a new hand-pushed feed cart for round bales with a hydraulic lift cylinder and free-spinning bale unroller turntable.
Designed to handle bales up to 5 ft. dia. at 2,000 lbs., it's a simple, easy-to-handle rig that nearly anyone can operate. It loads the bale hydraulically with a bale spear mounted on a spinning turntable. Powered by a 110-volt hydraulic unit, it plugs into an extension cord when loading a bale. Once loaded, you unhook the cord and push the cart up and down aisles in the barn, peeling hay from the bale by turning the turntable, which rides on a double tapered roller bearing.
"It saves your back. Takes no effort to load a bale and, once loaded, the cart rolls freely. It's simple, with no complicated mechanisms requiring maintenance. Sells for half the price of other bale feed-out carts on the market at $2,800 (Canadian)," says Van Dyke.
For more information, contact: FARM SHOW Followup, Camtech Products Inc., P.O. Box 301, Cambridge, Ontario Canada N1R 5T$ (ph 519 622-3634).
To read the rest of this story, download this issue below or click
here to register with your account number.
