«Previous    Next»
Bend-All Bender Makes - Bolts Brackets, Hooks & Handles
Bending your own U-bolts, eye hooks, angled brackets or other such configurations is easy with the new "Bend-All" utility bender that can be used on round or square rods or flat steel.
The handy shop tool mounts on a 38-in metal stand that bolts to the floor. It has an extendable handle for plenty of leverage. Comes with an assortment of steel dies from 1 to 3 in. dia, as well as a right angle bend attachment. Will handle round or square steel rod up to 5/8-in. dia. or flat steel up to 5/16-in. thick by 2 in. wide.
Sells for $297 (shipping included in U.S.). Optional add-ons include round tubing dies for 7/8 and 3/4-in. dia. tubing up to 10ga, and a scroll attachment that'll bend up to 3/ 16-in. thick by 1 in. hot rolled flat stock.
Contact: FARM SHOW Followup, FAB Center Sales, P.O. Box 192, Clay Center, Kan. 67432 (ph 800 235-6307 or 913 632-5638).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1994 - Volume #18, Issue #3