Work Center For Deere Tractor Cabs

Work Center For Deere Tractor Cabs TRACTORS Accessories 21-2-26 Monitors, phones, radios, and other paraphernalia can all be set up in one convenient location with this new "work center" de-signed for Deere tractor cabs, says Jeff Weisskopf, Jeff's Welding & Metal Fabrication, Victor, Iowa. The "work center" mounts on the right side of the steering column and consists of two metal shelves, one on top for monitors and one below it for phones and radios. The unit bolts onto a post on the cab by removing a pair of plastic plugs already in the post. Once installed, the entire unit can be swiveled from side to side as needed to improve the operator's vision. The top shelf mounts on a "T" arm and can be adjusted up or down by loosening a set screw or removed entirely by loosening the set screw and pulling it out. "If you don't need to use your monitors you can quickly remove the top shelf and keep the bottom shelf for year-around use. If you want to use the monitors the following spring all you do is slide the top shelf back on and tighten the set screw," says Weisskopf. Four different models are available to fit 6000, 7000, 8000 series, and Sound Gard cabs. They sell for $85.50 plus S&H except for the Sound Gard model which sells for $83.50. Contact: FARM SHOW Followup, Jeff's Welding & Metal Fabrication, 2103 B. Ave., Box 381, Victor, Iowa 52347 (ph 319 647-2849).

To read the rest of this story, download this issue below or click here to register with your account number.