2 Ton Bulk Feed Bin
 ✖  |
I made a 2-ton bulk feed bin by mounting a 1-ton hog feeder upside down on top of an identical feeder and bolting the two together. I used channel iron to build 8-ft. long legs that bolt to the bottom feeder. Angle iron was also used to build a ladder that extends to the top of the bin where I made a fill hole by cutting off the bottom of the top feeder and hinging one side. (Roger Fisher, Box 9048, Spirit Lake, Iowa 51360)
Click here to download page story appeared in.
Click here to read entire issue
2 ton bulk feed bin LIVESTOCK Feeding Equipment 15-2-34 I made a 2-ton bulk feed bin by mounting a 1-ton hog feeder upside down on top of an identical feeder and bolting the two together. I used channel iron to build 8-ft. long legs that bolt to the bottom feeder. Angle iron was also used to build a ladder that extends to the top of the bin where I made a fill hole by cutting off the bottom of the top feeder and hinging one side. (Roger Fisher, Box9048, Spirit Lake, Iowa 51360)
To read the rest of this story, download this issue below or click
here to register with your account number.
