1992 - Volume #16, Issue #3, Page #22
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Long Reach Post Driver
"Reaches over ditches, fences and other obstacles, unlike most fence drivers which mount up close to the side of the tractor," says Roger Thomas, company representative for a new "long reach" post driver that mounts on any Cat. II tractor 3-pt.No hydraulics or pto required. You simply raise and lower the 3-pt. Because it reaches out up to 11 ft. you can use it almost any-where, including hillsides and ditches, that would otherwise be almost impossible to fence with machinery.
Constructed from heavy-gauge steel, the post driver consists of a 4 by 6-in. steel beam supporting a 11/2-in. thick steel plate flat driver. An adjustable upper lift bar raises and lowers the driver as the 3 pt. is moved.
Contact FARM SHOW Followup, David W. Thomas, Ltd., Kerry Road, Newton, Powys., SY 161 DX England (ph 01144 686 625721; fax 01144 686 622049).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
