Plow Blade Mounts On Back Of IHC Tractor
 ✖  |
I paid $25 for a plow blade designed to mount on front of a truck and adapted it to the back of an INC tractor. All I had to do was to weld a couple lengths of angle iron to the plow frame. Holes were cut into these to hook up to a pair of 1 1/4 by 3-in. heavy flat iron arms with enough length to let me lift and adjust the blade as needed. Notches were cut into the ends of the arms to fit the hitch. The blade has a lot of weight and cuts well for driveway grading and snow removal. (C.F. Marley, Rt. 2, Box 165, Nokomis, Ill. 62075)
Click here to download page story appeared in.
Click here to read entire issue
Plow Blade Mounts On Back Of IHC Tractor TRACTORS Miscellaneous 19-6-37 I paid $25 for a plow blade designed to mount on front of a truck and adapted it to the back of an INC tractor. All I had to do was to weld a couple lengths of angle iron to the plow frame. Holes were cut into these to hook up to a pair of 1 1/4 by 3-in. heavy flat iron arms with enough length to let me lift and adjust the blade as needed. Notches were cut into the ends of the arms to fit the hitch. The blade has a lot of weight and cuts well for driveway grading and snow removal. (C.F. Marley, Rt. 2, Box 165, Nokomis, Ill. 62075)
To read the rest of this story, download this issue below or click
here to register with your account number.
