2005 - Volume #29, Issue #1, Page #31
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Removable Handrail Design
![]() |
That's how he came up with the simple idea of anchoring steel "receiver" shafts in the concrete so he can slip the handrail pipes over the top.
He inserted 12 to 15 in. high, 3/4 in. sq. steel shafts spaced equally apart. "The stakes have to be solid and straight. That's very important," Combs says. Scrap iron welded horizontally to the bottom of each shaft keeps them solid. The hand rails are made from 1 in. hollow square tubing. The legs slide down onto the shafts and stand firm. To bring in furniture, he just lifts the rails off and slides them back on later.
Combs puts a bit of grease on the shafts so they don't rust to the handrail pipes. In 20 years of use, he's had no problems.
Contact: FARM SHOW Followup, Delwyn Combs, 10042 N 2200 Rd., Sciota, Ill. 61475 (ph 309 456-3606).
![](/img/download-story.png)
Click here to download page story appeared in.
![](/img/entire-issue.png)
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.