You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
How To Remove Stubborn Bearing Races From Hubs In Medium Trucks
Chris Despain, East Peoria, Ill.: “To remove stubborn bearing races from hubs/drums in medium and heavy-duty trucks, I stuff wet rags in the well of the hub backed up against the race, then weld a bead around the race where the tapered bearing rides. When the weld cools, it shrinks naturally and the bearing taps out
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
How To Remove Stubborn Bearing Races From Hubs In Medium Trucks FARM SHOP Handy Hints Chris Despain East Peoria Ill : “To remove stubborn bearing races from hubs/drums in medium and heavy-duty trucks I stuff wet rags in the well of the hub backed up against the race then weld a bead around the race where the tapered bearing rides When the weld cools it shrinks naturally and the bearing taps out easily I will already have the new race in a freezer cooling off The residual heat from the welding process helps install the new race I put a dab of bearing retainer around the race on installation to help install and retain Also I sometimes add bearing retainer compound to tighten up a loose race ”
To read the rest of this story, download this issue below or click
here to register with your account number.
