2016 - Volume #40, Issue #3, Page #32
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
How To Remove A 3/4-in. Broken Stud
Ray Webb, Emlenton, Penn.: “Here’s how I remove a 3/4-in. broken stud. First, I drill a 1/4-in. pilot hole in the end of the stud. Then I take a 1/2-in. right hand drill bit and run it in reverse to back the stud out. You might have to sharpen the bit for reverse direction. This has worked well for me many times.”
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
